What are the common problems of fully automatic vacuum packaging machines? This is a very practical question. Let's explore it with manufacturers of fully automatic vacuum packaging machines.

Firstly, a fully automatic vacuum packaging machine is an advanced packaging device that can package products in a vacuum state, extend the shelf life of products, and prevent oxidation and contamination. However, even such high-tech equipment will face some common problems. The following lists some possible problems and solutions.

Insufficient vacuum degree:

This may be caused by incomplete sealing. Check whether the sealing gasket is intact and make sure that the packaging bag is completely sealed. In addition, you can also check whether the vacuum pump is working properly and whether it needs to be replaced or repaired.

Leakage of the packaging bag:

If bubbles or gas enter the bag, the vacuum degree will decrease. Check whether the packaging bag has any scratches or damage. If there are damaged areas, the bag needs to be replaced.

Rupture of the packaging bag:

During the packaging process, the packaging bag may rupture for some reasons, such as the bag being too thin or too rough, or the vacuum degree being too high. Check the quality of the bag and adjust the vacuum degree as needed.

Low packaging efficiency:

If the packaging speed is slow, it may be because the service life of the vacuum pump has expired and needs to be replaced. In addition, you should also check whether there are other parts that need to be repaired or replaced. 

Inconvenient operation:

Some fully automatic vacuum packaging machines may have problems such as complicated or unstable operation. This may be caused by the design issues of the equipment or by the operators' unfamiliarity with the equipment operation. The solution to this problem is to provide detailed operation instructions and training so that the operators can become familiar with the operation of the equipment.

Difficulties in cleaning and maintenance:

Fully automatic vacuum packaging machines usually need regular cleaning and maintenance to maintain a good working condition. If the cleaning and maintenance work is difficult, it may lead to equipment failures or reduced work efficiency. Provide cleaning and maintenance guidelines and ensure that the operators can correctly carry out the cleaning and maintenance procedures.

Need for replacement of parts:

Fully automatic vacuum packaging machines need to regularly replace some wearing parts, such as vacuum pumps, sealing gaskets, etc. If it is difficult to replace parts or the replacement cost is high, it may affect the normal operation of the equipment. It is recommended to provide replacement guidelines for wearing parts and ensure that the wearing parts can be easily obtained and replaced.

In conclusion, although fully automatic vacuum packaging machines can improve the packaging quality and shelf life of products, they may also face some common problems. By correctly recognizing and solving these problems, the normal operation of the equipment can be ensured, production efficiency can be improved, and better product quality can be provided.